Filler Selection Guide
| Uses—Use description—desired characteristics (Resin/Hardener mixture thickened with a Filler) |  |  | ||||
|---|---|---|---|---|---|---|
| 404 High Density | 406 Colloidal Silica | 403 Microfibers | 405 Filleting Blend | 407 Low-Density | 410 Microlight™ | |
| Bonding Hardware—Increased fastener interface and hardware load capability—maximum strength |  | | | | ||
| General Bonding—Join parts with epoxy thickened to create a structural gap filler—strength/gap filling | | | | | | |
| Bonding with Fillets—Increase joint bonding area and create a structural brace between parts—smoothness/strength | | | | | | |
| Laminating—Bond layers of wood strips, veneers, planks, sheets and cores—gap filling/strength | | | | | | |
| Fairing—Fill low areas and voids with an easily sanded surface filler/fairing compound—sandability/gap filling | | | ||||
Call our toll-free help line to talk with our technical staff, weekdays 9:00 AM to 5:00 PM EST
1-866-937-8797
E-MAIL Q&A | FAQ
WEST SYSTEM is a registered trademark of West System Inc | Sitemap | Terms & Conditions | Web Site by Ingenex Digital